“Foam Core Wings” is a play on words. This page is not only about how to create light but durable foam core wings for RC planes. It is a DIY page for those who want to learn how to use fairly low tech (no CNC here) methods to build very light but durable RC planes. The resulting planes not only look very professional but also fly great. The processes used for plane and wing construction will be outlined in detail through posts here and videos on YouTube. Also, we will include information on how to build some of the tools used during construction.
I have read a lot of good things about doing my own alignments. It can save money and should allow me to do custom alignments to my Miatas. I looked at the different alignment tools and processes to get ideas on how I could make my own tools. I get much more satisfaction from making […]
The driver’s side window in my Evolution Orange Miata started lowering to only about half way down and would it not go any further. However, it would roll back up without issue. Since the regulator motor still worked, I suspected the cable keepers for the power unit may be interfering with the mechanism some how. […]
I started smelling fuel inside my 99 AE. It continued to get worse and the CEL came on with a P0455 code. I started by visually inspecting all the vacuum lines. I pulled the CDCV from under the passenger side rear and tested it to no avail. Then I pulled the Purge Solenoid Valve from […]